Multi-tech-systems MTS2SA-T Manual de usuario Pagina 34
- Pagina / 181
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Chapter 4 – Command Line Interface (CLI)
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 34
Serial Commands – Setup
Command Syntax set serial [s0/s1] chat-script <line-num> <expect-string> <send-string>
Description
Sets expect and send strings for the chat script to act on the modem.
Triggers for a reboot upon save.
Important Note:
Use double quotes if more than one word is used in the
<expect-string>/<send-string>.
Default Value
NA
Success
OK
Error 1. Too few arguments
"Usage: set serial s0/s1 chat-script <line-num> <expect-string> <send-string>
Type 'set serial s0/s1 chat-script ?' for more information"
Command Syntax Set serial [s0/s1] connect-type <direct/modem>
Description
Sets the connect type of the serial port to direct/modem connect.
Note: Modem port (S1) will always have connect-type as modem since it is a
built-in modem
Default Value
Direct
Success
OK
Error 1. Too few arguments
“Usage: set serial s0/s1 connect-type <direct/modem>
Type ‘set serial s0/s1 connect-type ?’ for more information”
2. Invalid string
“error: Invalid string
Type ‘set serial s0/s1 connect-type ?’ for more information”
3. If “set serial s1 connect-type direct” is given
error: modem port s1 is a built-in modem interface; it cannot be set to direct
Command Syntax set serial [s0/s1] connect-state <answering/dialing/both>
Description
Sets the connect state of the serial port to answering/dialing/both state.
Default Value
Both
Success
OK
Error 1. Too few arguments
“Usage: set serial s0/s1 connect-state <answering/dialing/both>
Type ‘set serial s0/s1 connect-state ?’ for more information”
2. Invalid string
“error: Invalid string
Type ‘set serial s0/s1 connect-state ?’ for more information”
Command Syntax set serial [s0/s1] data-bits <7/8>
Description
Set the data-bits.
Default Value
8
Success
OK
Error 1. Too few arguments
“Usage: set serial s0/s1 data-bits <7/8>
Type ‘set serial s0/s1 data-bits ?’ for more information”
2. Invalid data-bit setting
“error: Data-bits range supported: [7/8]
Type ‘set serial s0/s1 data-bits ?’ for more information”
- MultiConnect Adapter 1
- Table of Contents 3
- 5
- Specifications 6
- Types of Adapters Available 7
- Package Contents 7
- Handling Precautions 7
- LED Indicators 10
- Chapter 2 – Installation 11
- Connecting the Cables 12
- Connecting the Power 13
- Chapter 3 – Managing and 14
- Configuring the MultiConnect 14
- Adapter 14
- General Notes 15
- General Setup Commands 16
- IP Setup Commands 23
- Serial Setup Commands 27
- Buffer-datasize 33
- Buffer-time (secs) 33
- Descriptions 33
- PPP Setup Commands 42
- HTTP Server Commands 47
- SMTP Client Commands 49
- POP3 Client Commands 52
- FTP Client Commands 55
- SNTP Client Commands 57
- Region Codes Using the CLI 61
- Chapter 6 – Prerequisite 62
- Configurations 62
- IP Mode 63
- Chapter 7 – Telnet Dialout 65
- Scenario 1 – Manual Dialout 67
- Scenario 2 – Auto Dialout 69
- Introduction 73
- Chapter 10 – Modem Mode AT 85
- Command Types 86
- Command Detail 88
- +MS Modulation Selection 107
- Reports the Mode 108
- FastConnect Commands 114
- +PCW Call Waiting Enable 115
- +PMH Modem-on-Hold Enable 115
- +PMHR Initiate Modem-on-Hold 115
- +PMHT Modem-on-Hold Timer 116
- +PIG PCM Upstream Ignore 116
- +PSS Use Short Sequence 117
- S-Registers 118
- Result Codes 127
- Adding Users and Passwords 132
- Setting Passwords 133
- Deleting Users 133
- IPCP Mode 134
- Show Commands 134
- Connect Type 135
- Chapter 12 – HTTP Server 136
- Setup and Configuration 137
- The Parameter List 138
- Example: 139
- The Embedded HTML Page 140
- CGI Scripts 140
- Technical Information 142
- Chapter 13 – SMTP Client 143
- Command Prompt 145
- Interactive Mode 146
- Notes: 147
- Configuration 148
- Chapter 14 – POP3 Client 153
- Error Messages 158
- Email Using Interactive Mode 159
- FTP Client Features 160
- Prerequisites 161
- Note About Read and Store 167
- Features 168
- Server 170
- Appendix A – Flash Upgrade 171
- Appendix B – Regulatory 173
- Information 173
- U.S.A. and Canada) 174
- Replacement Parts 175
Relacionado con productos y manuales para Hardware Multi-tech-systems MTS2SA-T
Hardware Multi-tech-systems CF220 Manual de usuario
(84 paginas)
(84 paginas)
Hardware Multi-tech-systems RF660 Manual de usuario
(189 paginas)
(189 paginas)
Hardware Multi-tech-systems RF102S Manual de usuario
(26 paginas)
(26 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.056 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales