Multi-tech-systems MTS2SA-T Manual de usuario descargar pdf (Pagina 133)

Chapter 11 – Point-to-Point Protocol

Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 133

Setting Passwords

Upon successful execution of this command, the MultiConnect IP will return an OK or an error

message.

Command:

# user password <username> <password>

Example:

# user password user1 user1

Deleting Users

Upon successful execution of this command, the MultiConnect IP will return an OK or an error

message.

Command:

# user delete <username>

Example:

# user delete user1

Notes

• PPP is enabled on the modem port

• PPP interface is the IP-enabled interface in MultiConnect IP

• All IP-enabled services can be used only after the PPP link is up with an IP Address

• In the event of a PPP link down, SMTP and POP3 requests can trigger the PPP link

establishment and termination

PPP Configuration

PPP Interface Related Parameters

• Enable PPP

• Enable/Disable Authentication and Authentication Type

• Configure user name/password for remote peer to authenticate

• Configure IPCP mode

• Configure local and remote IP addresses

• Enabling/Disabling compression

• Configure the compression algorithm

Serial Interface Related Parameters

• Configure the Connect Type

• Configure the modem settings

• Configure the dialing trigger mode

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 180 181

Sin comentarios

Multi-tech-systems MTS2SA-T Manual de usuario Pagina 133