search

Multi-Tech Systems MTASR3-200 Manual de usuario Pagina 66

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 82
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 65
RASFinder User Guide
MTASR3-200
66
Command: \G
n
Modem Port Flow Control
Values:
n
= 0
Default: 0
Description: \G0 Returns an
OK
for backward compatibility with some software.
\G1 Not supported—responds ERROR.
Command: \J
n
Data Buffer Control
Values:
n
= 0
Default: 0
Description: \J0 Enable data buffer—serial port speed is independent of connect speed.
\J1 Not supported—responds ERROR.
Command: \K
n
Set Break Control
Values:
n
= 5
Default: 5
Description: \K5 Modem sends break signal received from the DTE to the remote modem.
Command: \N
n
Error Correction Mode Selection
Values:
n
= 0–5, or 7
Default: 3
Description: \N0 Non-error correction mode with data buffering (same as
&Q6
).
\N1 Direct mode.
\N2 MNP reliable mode.
\N3 V.42/MNP auto-reliable mode.
\N4 V.42 reliable mode.
\N5 V.42, MNP, or non-error correction (same as
\N3
).
\N7 V.42, MNP, or non-error correction (same as
\N3
).
Command: \Q
n
Local Flow Control Selection
Values:
n
= 0, 1, or 3
Default: 3
Description: \Q0 Disable flow control (same as
&K0
).
\Q1 XON/XOFF software flow control (same as
&K4
).
\Q2 CTS-only flow control. Not supported—responds ERROR.
\Q3 RTS/CTS hardware flow control (same as
&K3
).
Command: \T
n
Inactivity Timer
Values:
n
= 0–255
Default: n/a
Description: \Tn Inactivity timer setting contingent on either \T value or S-Register S30 value (e.g.,
AT\T45&W0<cr> configures in parallel ATS30=45&W0<cr>), and vice versa.
Command: \V
n
Protocol Result Code
Values:
n
= 0 or 1
Default: 1
Description: \V0 Disable protocol result code appended to DCE speed.
\V1 Enable protocol result code appended to DCE speed.
Command: \X
n
XON/XOFF Pass-Through
Values:
n
= 0 or 1
Defaults: 0
Description: \X0 Respond to and discard XON/XOFF characters.
\X1 Not supported—responds ERROR.
Command: -C
n
Data Calling Tone
Values:
n
= 0 or 1
Defaults: 0
Description: -C0 Disable V.25 data calling tone.
-C1 Enable V.25 data calling tone.
Vista de pagina 65
1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 81 82

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para Redes Multi-Tech Systems MTASR3-200
Redes Multi-Tech Systems MTASR1-100 Manual de usuario   (80 paginas)
Redes Multi-Tech Systems MTCBA-G-F4 Manual de usuario   (30 paginas)
Redes Multi-Tech Systems Computer Drive MTD-EVe Manual de usuario    (26 paginas)
Redes Multi-Tech Systems Modem MTCBA-C Manual de usuario   (31 paginas)
Redes Multi-Tech Systems Hub Manual de usuario   (40 paginas)
Redes Multi-Tech Systems MTCBA-C-EN-NX Manual de usuario   (60 paginas)
Redes Multi-Tech Systems MultiConnect Adapter Serial-to-Ethernet Adapter with IP Manual de usuario   (22 paginas)
  • Kwikset Sampi Prescolite Easiphone Fondital
  • Fisher & Paykel Neveras Revolabs No Dell Lentes de las cámaras KanexPro Conversores De Video Elinchrom Foto Flashes De Estudio
  • Samsung 150T Yamaha 501 LG OLED55B7V Sony DSC-T500 Pioneer BDP-170
  • Amana Freezer Refrigerator Manual de usuario Sony ICF-B200 Manual de usuario StarTech.com SM2NGFFMBU33 Manual de instrucciones Olympus BCM-1 Manual de usuario AEG L8WBC61SC Manual de usuario