Multi-Tech Systems ISI5634PCI/4/8 Manual de usuario descargar pdf (Pagina 89)

Chapter 4—AT Commands, S-Registers, Result Codes

Description: \V0 Disable the appending of the protocol result code to

the DCE speed.

\V1 Enable the appending of the protocol result code to the

DCE speed.

\V2 Same as \V1.

Command: \Xn XON/XOFF Pass-Through

Values: n = 0 or 1

Defaults: 0

Description: \X0 Modem responds to and discards XON/XOFF

characters.

\X1 Modem responds to and passes XON/XOFF charac-

ters.

Command: -Cn Data Calling Tone

Values: n = 0 or 1

Defaults: 0

Description: -C0 Disables V.25 data calling tone to deny remote data/fax/

voice discrimination.

-C1 Enables V.25 data calling tone to allow remote data/fax/

voice discrimination.

Command: %B View Numbers in Blacklist

Values: n/a

Description: If blacklisting is in effect, AT%B displays the numbers

of the last failed call attempt in the previous two hours.

In countries that do not require blacklisting, the ERROR

result code appears.

Command: %Cn Data Compression Control

Values: n = 0 or 1

Default: 1

Description: %C0 Disables V.42bis/MNP 5 data compression.

%C1 Enables V.42bis/MNP 5 data compression.

Command: %DCn AT Command Control

Values: n = 0 or 1

Default: 0

Description: %DC0 The modem responds to AT commands.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 121 122

Sin comentarios

Multi-Tech Systems ISI5634PCI/4/8 Manual de usuario Pagina 89