Multi-Tech Systems ISI5634PCI/4/8 Manual de usuario descargar pdf (Pagina 68)

ISI5634PCI/4/8 User Guide

3. List the RPM files on the CD-ROM using this command:

LINUX-RPM: Copying the driver from a floppy

The ISI driver .rpm file can be copied from a DOS formatted floppy

using the 'mcopy' command if the 'mtools' have been installed.

For RPM version 6.2, issue the command

'mcopy a:isicom-1.1-3.src.rpm <destination

folder>' to copy the isicom-1.1-3.src.rpm ( or current driver name) file

to the destination folder.

For RPM version 7.0, issue the command

'mcopy a:isicom-1.2-3.src.rpm <destination

folder>' to copy the isicom-1.2-3.src.rpm ( or current driver name) file

to the destination folder.

As an alternative, the floppy can be manually mounted and the file

copied to the required destination folder.

NOTE: To read from a DOS formatted floppy, a kernel with support for

the FAT file system (either statically linked in the kernel or as modules)

is required.

Steps for copying the driver from a floppy:

1. Linux floppy disks are in ext2 format.

2. Insert Linux driver in drive A: and mount floppy drive.

> mount -t ext2 /dev/fd0 /mnt/floppy

3. Copy files from floppy to a temporary directory on hard drive.

> mkdir /isi

> cd /isi

4. The current isicom.o file should be backed up before installing the

RPM. The easiest way is simply to rename it or copy it into another

file. For example, cp (or mv) isicom.o isicom.original. It

is usually located in the /usr/local/ISICOM directory. For the version 7

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 121 122

Sin comentarios

Multi-Tech Systems ISI5634PCI/4/8 Manual de usuario Pagina 68