Multi-Tech Systems MT5600BA-V92 Manual de usuario descargar pdf (Pagina 37)

Chapter 6 – Callback Security

Multi-Tech Systems, Inc. MT5600BA-V92 User Guide 37

Calling Procedure

Use the following procedure to call a modem that has callback security enabled.

Autoanswer must be enabled on the calling modem (S0=1 or S0=2).

1. Using a data communication program such as HyperTerminal, dial the number of the callback

modem.

2. When the connection is established, the callback modem responds with a request for a

password.

3. Type the password for your modem, and then press E

NTER. You have three attempts to enter

a valid password or be disconnected.

4. If the password is valid, the callback modem disconnects. Then, after a short delay, it calls

the number associated with the password and establishes a working connection.

Note: If you are calling a direct connect number, you must append a hyphen (-) to the

password. If the corresponding phone number has - as its first character, you will be able to

go directly online with the callback modem. If the corresponding phone number has no -

character, you will be prompted for a different password.

8. Press Æ, Æ to go to the ENTER NUMBER #2? LCD.

9. Repeat steps 3–7 to enter the next number.

10. Repeat as many times as necessary, up to memory location 30, until all numbers have been

entered.

Warning: There is no way to review an entry to confirm that it has been entered correctly. If you

attempt to look at a number entry by pressing the Enter

button for an ENTER NUMBER #n?

LCD, it is possible for you to accidentally erase the entry.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 56 57

Sin comentarios

Multi-Tech Systems MT5600BA-V92 Manual de usuario Pagina 37