Multi-tech-systems MultiConnect Adapter Manual de usuario Pagina 14

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 18
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 13
Chapter 6 – Flash Upgrade
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354B) 14
Chapter 6 – Flash Upgrade
Introduction
The MultiConnect Adapter contains a 2 MB flash wherein the boot image, the firmware and configuration files are
stored in a compressed format.
Serial Flash Upgrade Scenario
Following steps explain the procedure to upgrade a flash using the serial COM port (serial flash upgrade).
Connect the MultiConnect Adapter to a PC COM Port.
Open an application through which we can access the serial device(e.g., Meterm, zoc, hyperterm).
Reboot the MultiConnect Adapter.
Wait for the boot message and prompt “press d to download” to appear.
Press d when prompted.
Select the XMODEM Protocol from the Terminal application.
Choose a file (MTXCSEM-TFTP-…) file to be uploaded.
Perform a file upload.
The MultiConnect Adapter reboots and will be up after a few seconds (10-15 secs).
The MultiConnect Adapter reboots after it has been successfully upgraded.
Vista de pagina 13
1 2 ... 9 10 11 12 13 14 15 16 17 18

Comentarios a estos manuales

Sin comentarios