Multi-tech-systems MT5634ZPW-PCI Manual de usuario descargar pdf (Pagina 51)

MT5634ZPW-PCI

3 AT Commands, S-Registers and Result Codes

S42

decimal 0–1 1 Enables/disables the 56K auto

rate. Retrain and fallback are

disabled in data mode. 0 = dis-

able; 1 = enable.

S43

decimal 0–1 1

For testing and debugging only.

Enables/disables V.32bis start-up

auto mode operation. 0 = disable;

1 = enable.

S48

decimal 7 or 128 7 The following chart lists the S36

and S48 configuration settings

necessary to negotiate certain

types of connections.

S89

seconds 0, 5–255 10 Sets the length of time in the off-line

command mode before the modem

goes into standby mode. A value

of zero prevents standby mode; a

value of 1–4 sets the value to 5.

S108

decimal 0-3, 6,7 6 Selects the digital loss if using the

modem thru a PBX line. The

default value is -6dB loss, the

value used when calling from a

typical POTS line long distance.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 93 94

Sin comentarios

Multi-tech-systems MT5634ZPW-PCI Manual de usuario Pagina 51