Multi-tech-systems MT2834BLR Manual de usuario descargar pdf (Pagina 37)

Chapter 4 - Commands

VALUES: n = 1 thru 3

DEFAULT: Read Only Command

DESCRIPTION: $H1 brings up Help Screen #1.

$H2 brings up Help Screen #2.

$H3 brings up Help Screen #3.

COMMAND: In

VALUES: n = 0,1or 2

DEFAULT: Read Only Command

DESCRIPTION I0 requests modem ID #.

I1 requests firmware revision #.

I2 for MTS internal use.

COMMAND: I9

VALUES: N/A

DEFAULT: Read Only Command

DESCRIPTION: The I9 command is a query to display this modem's

characteristics when operating within Windows 95. Entering

ATI9<cr> invokes BR 28800 FAX CT on your video

monitor. (The response to the query reveals that your

modem is a BR, 28.8K, FAX and Class Two capable

device.)

COMMAND: L

VALUES: 5, 6, 7, 8, 9, 10 and 11

DEFAULT: Read Only Command

DESCRIPTION: Lists all stored telephone numbers in memory.

L5 lists all current operating parameters.

L6 lists all current S-Register values.

L7 lists additional parameters.

L8 lists current on-line diagnostics.

L9 displays Signal Strength Information.

L10 displays Signal to Noise Ratio Information.

L11 displays Noise Information.

COMMAND: #Ln

VALUES: n = 0 thru 3

DEFAULT: #L0

DESCRIPTION: #L0 selects modems negotiate V.42 Mode.

#L1 selects MNP on and LAP-M off.

#L2 selects LAP-M on and MNP off.

#L3 selects no detection phase; go directly to LAP-M

mode.

COMMAND: $MBn

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 89 90

Sin comentarios

Multi-tech-systems MT2834BLR Manual de usuario Pagina 37