Multi-tech-systems MT5634ZLX Manual de usuario descargar pdf (Pagina 38)

MultiMobile User Guide

MT5634ZLX/E

&T6 Remote digital loopback test, in normal mode

&V View active file and stored phone numbers

&W Store active configuration into the modem’s NVRAM

&Zn=x Store telephone number (n=0 to 3; x=<string>) (see also the dial modifier in ”ATDn”

command). The max. number of digits per string is 40.

Extended “AT\” (Back Slash) Command Set (* indicates factory default setting)

Command Function

\Jn Constant DTE speed option

\J0 * DCE and DTE rates are independent

\J1 Force the DTE interface speed to the DCE connection rate (line speed) after on-line

\Nn Error control mode options

\N0 Buffered mode, no error control (flow control is allowed).

\N1 Direct mode, no error control (no flow control is allowed).

\N2 MNP reliable mode. If MNP 2-4 error control establishment fails, the modem

disconnects.

\N3 * V.42, MNP or buffer mode. The modem attempts to connect in V.42 mode. If this

fails, the modem attempts to connect in MNP mode. If this fails, the modem connects

in buffer mode.

\N4 V.42 or disconnect. The modem attempts to connect in V.42 mode. If this fails, the

call will be disconnected.

\Qn Local flow control options

\Q0 Disable flow control (same as “AT&K0”)

\Q1 XON/XOFF software flow control (same as “AT&K4”)

\Q3 * RTS/CTS hardware flow control (same as “AT&K3”)

\Tn Set inactive timer (for buffer mode only)

n=0 * Disable inactive timer

n=1-255 Enable inactive timer. Length in minutes

\Vn Protocol result codes

\V0 Disable protocol result code appended to DCE speed.

\V1 * Enable protocol result code appended to DCE speed.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 69 70

Sin comentarios

Multi-tech-systems MT5634ZLX Manual de usuario Pagina 38