Multi-tech-systems MT3334ZDX Manual de usuario Pagina 34

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 71
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 33
MT3334ZDX/V Owner's Manual
34
Command: \K
n
Set Break Control
Values:
n
= 5
Default: 5
Description: \K5 Modem sends break signal received from the DTE
to the remote modem.
Command: \N
n
Error Correction Mode Selection
Values:
n
= 0–5
Default: 3
Description: \N0 Non-error correction mode with data buffering
(same as
&Q6
).
\N1 Direct mode.
\N2 MNP reliable mode.
\N3 V.42/MNP auto-reliable mode.
\N4 V.42 reliable mode.
\N5 V.42, MNP, or non-error correction (same as
\N3
).
Command: \V
n
Protocol Result Code
Values:
n
= 0 or 1
Default: 1
Description: \V0 Disable protocol Result Code appended to DCE
speed.
\V1 Enable protocol Result Code appended to DCE
speed.
Command: %C
n
Data Compression Control
Values:
n
= 0 or 1
Default: 1
Description: %C0 Disable V.42bis/MNP 5 data compression.
%C1 Enable V.42bis/MNP 5 data compression.
Command: $D DTR Dialing
Values:
n
= 0 or 1
Default: 0
Description: $D0 Disables DTR Dialing.
$D1 Enables DTR Dialing.
Vista de pagina 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 70 71

Comentarios a estos manuales

Sin comentarios