Multi-tech-systems MT2834ZPX Manual de usuario descargar pdf (Pagina 40)

MT2834ZPX Owner's Manual

S-Registers

Certain Command Mode configurations are stored in memory registers

called, S-Registers. The

command is used to assign a value to, and

to read the current value of an S-Register. To assign a value to an S-

followed by the S-Register number and an

equals sign (

)

To read an S-Register value, enter the letter

followed by the S-Register number and a question mark (

), then hit

RETURN. To verify that the S-Register value was entered correctly,

enter for example,

ATS8?

and hit RETURN. You should receive a

response of the assigned value given to that S-Register.

Number of Rings Until Modem Answers

Unit: 1 ring

Range: 0-255

Default: 0

Description: Sets the number of rings before the modem answers.

Rings Which Have Occurred

Unit: 1 ring

Range: 0-255

Default: 0

Description: Counts the number of rings that have occurred.

Escape Code Character

Unit: ASCII Character

Range: 0-127

Default: 43 (

+ sign

)

Description: Defines the escape code character.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 80 81

Sin comentarios

Multi-tech-systems MT2834ZPX Manual de usuario Pagina 40